Best Fence Installation in Bel Air
Architectural aluminum fence, gated entries and privacy fence for Bel Air estates, planned around Los Angeles hillside rules and the state’s new rules for the space closest to the house. Installed through our licensed installation partners.
Fencing for Bel Air Estates
Bel Air is a hillside neighborhood of the City of Los Angeles, rising from Sunset Boulevard into the Santa Monica Mountains between Beverly Glen and the 405. Its winding streets, gated entrances and large estates make the fence and the gate part of the architecture.
Bel Air owners usually want three things from a fence: security that does not look like security, privacy from winding roads above and below, and a gate that makes a proper entrance. On steep lots, the fence also has to follow the hillside cleanly and respect the city’s hillside height limits.
Fire is part of the conversation here too. Parts of Bel Air are in the city’s Very High Fire Hazard Severity Zone, and the city’s mountain fire district was created after the 1961 Bel Air Fire. Every finish and gate style we mention is on display in our Panorama City showroom.
Bel Air Fence Height Rules
This is a neighborhood of the City of Los Angeles, so fences follow the city zoning code and the Department of Building and Safety:
- Front yard: up to 3.5 feet in most residential (R) zones, or 6 feet on lots zoned A or RA. Taller front fences need City Planning approval.
- Side and rear yards: up to 8 feet on lots at least 40 feet wide and outside a hillside area. On hillside-area lots, or lots narrower than 40 feet, the limit is 6 feet.
- Permits: masonry or concrete walls over 3.5 feet need a building permit.
Most of Bel Air is hillside, so side and rear fences there are usually limited to 6 feet. Bel Air is also under the city’s Hillside Construction Regulations, which limit grading, hauling and construction hours on larger projects. Check your parcel on the city ZIMAS map before you settle on heights.
Source: LADBS, Heights of Fences in Residential Zones and LAFD fire zone history. Rules change and individual lots can have special conditions, so confirm with the city before you order. We are glad to help you plan around them.
Fire Safety and Fencing in Bel Air
Bel Air Estates is among the communities the LAFD lists as partly inside the city’s Very High Fire Hazard Severity Zone, and the 2017 Skirball Fire destroyed homes in the area.
California’s new Zone 0 rules cover the first 5 feet around a home in Very High Fire Hazard Severity Zones. The state Board of Forestry adopted them in August 2026, and they take effect once the state finishes its final review. As adopted, they say combustible fences and gates may not be attached to a home, and that no new combustible fences or gates are allowed within 5 feet of a home once the rules take effect.
Lumina aluminum fence systems are noncombustible, based on the manufacturer’s fire test documentation, which makes them a strong choice for the run closest to the house. Ask us for a copy of the documents. Fire rules are still being finalized, so confirm current requirements with your fire department or building department before you build. Our Zone 0 fence guide has more detail.
Source: Board of Forestry Zone 0 regulation text (August 2026).
What Shapes a Fence in Bel Air
Gated entries
On an estate, the driveway gate sets the tone. Aluminum sliding and double swing gates are made in the same slat and finish as the fence, so the entrance and the perimeter read as one design.
Steep, winding lots
Bel Air lots climb and drop sharply. Posts are set to the grade and panels stepped down the slope so the lines stay level. Aluminum is light, which helps on hard-to-reach hillside runs.
Privacy from roads above and below
Winding streets mean neighbors can look down into a yard. A fully closed or high-privacy aluminum fence on the exposed sides, and an open style on the view side, balances privacy and view.
Long perimeters, low upkeep
Large properties mean long fence lines. Powder-coated aluminum does not rot, rust or need repainting, so the whole perimeter stays consistent.
Construction logistics
Hillside construction rules limit hauling and work hours. Lightweight aluminum panels are easier to bring up narrow streets than heavy masonry.
Fences That Suit Bel Air
Options for gated estates and hillside lots.
Driveway gates
Sliding and double swing gates sized for estate entries. See gates
Aluminum privacy fence
Linea, Ridgeline and Summit for privacy on exposed sides. See privacy fence
Open aluminum fence
Hampton’s slim vertical slats keep canyon views open. See Hampton
Our Fences in Person and on Real Homes
Real projects from our other areas, and the same fences on display in our Panorama City showroom.
How a Bel Air Fence Project Works
- See the options. Visit the showroom to compare gates and finishes, or call (818) 647-0007.
- Share your property. Send your address, the length of each run, gate openings and a few photos, especially of the entry, slopes and the street side.
- Get a clear package. We put together panels, posts, gates and hardware for your layout, with Bel Air’s rules for your lot in mind.
- Installation. Yes, we do install. We install through our licensed installation partners, or we can supply your own contractor.
Nearby Areas
We also work in Brentwood, Holmby Hills, Westwood and Beverly Hills. Browse all areas we serve, or read how fence installation in Los Angeles works with Lumina.
Frequently Asked Questions
Do you install fences in Bel Air?
Yes, we do. We install through our licensed installation partners. We supply the fence, gates and hardware from our Panorama City showroom.
How tall can a fence be in Bel Air?
Bel Air follows City of Los Angeles rules. Front-yard fences are generally limited to 3.5 feet. On hillside-area lots, which covers most of Bel Air, side and rear fences are limited to 6 feet.
Is your aluminum fencing noncombustible?
Yes. Lumina aluminum fence systems are noncombustible, based on the manufacturer’s fire test documentation. Ask us for a copy. Always confirm current fire rules for your lot with your fire or building department.
Can I put a wood fence next to my house?
California’s Zone 0 rules, adopted in August 2026 and pending final state approval, bar new combustible fences within 5 feet of a home in Very High Fire Hazard Severity Zones. Check current requirements before building.
What gate suits a steep Bel Air driveway?
A sliding gate is usually the better choice on a sloped driveway, because it does not need flat ground to swing open.
Do you supply contractors and builders in Bel Air?
Yes. Contractors and builders buy aluminum fence, gates and posts from us for their own projects. Call (818) 647-0007 or see our wholesale page.
Can I see the fences before I decide?
Yes. Visit our showroom at 14600 Arminta St, Panorama City, Monday to Friday 8 am to 5 pm, or Sunday 10 am to 4 pm by appointment.
Planning a Fence in Bel Air?
Visit the showroom or send your address and a few photos. We will help you choose the right fence for your Bel Air property, and install it through our licensed installation partners.