Aluminum Driveway Gates in Studio City
Sliding driveway gates and side yard gates in modern horizontal aluminum, sized for Studio City’s narrow lots and canyon driveways. Chosen in our Panorama City showroom and installed through our licensed installation partners.
Driveway Gates for Studio City Homes
Studio City fits a lot into a small area: compact lots on the flat streets near Ventura Boulevard, and steep canyon lots toward Laurel Canyon and Mulholland. Both make the gate a design decision as much as a security one.
On a short or sloped driveway there is often no room for a gate to swing open, which is where a sliding gate earns its place. On a narrow lot, the side yard gate sits a few feet from a neighbor’s window and needs to look as finished as the front.
Our gates come in the same five aluminum series as our fences: Linea, Ridgeline, Hampton, Summit and Ventura. Every gate is T6063 aluminum, powder coated in matte black, and carries a 25-year limited warranty. Planning the fence too? See our fence installation page for Studio City.
Gates That Suit Studio City Lots
Every gate comes in the series that matches your fence.
Sliding driveway gates
16 x 6 ft sliding gate panels in all five series. The gate runs along the fence line, so it suits canyon driveways too short or steep for a swing gate.
Side yard gates
4 x 6 ft pedestrian gates in every series. Ventura louvers keep a tight side yard private while letting air through; Ridgeline’s closely set slats read as solid.
White and wood-look options
The Linea pedestrian gate also comes in white to match a white Linea fence, and our WPC composite gates come in teak and dark gray.
Our Gates in Person and on Real Homes
From our showroom and a real project in nearby Westlake Village.



Studio City Gate Height Rules
Studio City is part of the City of Los Angeles. Gates follow the same height limits as fences, set by the city zoning code and enforced by the Department of Building and Safety.
- Front yard: about 3.5 feet in most residential (R) zones, or 6 feet on lots zoned A or RA. Taller front-yard gates need City Planning approval.
- Side and rear yards: up to 8 feet on lots at least 40 feet wide and outside a hillside area. On hillside-area lots, or lots narrower than 40 feet, the limit is 6 feet.
- Near Mulholland Drive: homes close to Mulholland can fall under the Mulholland Scenic Parkway Specific Plan, which limits fence, gate and wall materials visible from the parkway and can require review.
Two details catch Studio City owners most often: canyon lots south of Ventura are usually in a hillside area, and many lots are narrower than 40 feet. Either one brings the side and rear limit down to 6 feet.
Source: LADBS, Heights of Fences in Residential Zones. Rules change and individual lots can have special conditions, so confirm with the Department of Building and Safety before you order.
Choosing a Gate in Studio City
Measure the opening and the space beside it
A sliding gate needs clear room along the fence to slide into. Measure the opening, the run of fence next to it and any change in grade, and send photos of the driveway and street side.
Privacy or air
Ridgeline’s closely set 4 inch slats read as a solid gate. Ventura louvers block the view straight on but let air and light through, which keeps a narrow side yard from feeling boxed in. Our series comparison shows all five.
Match the fence
Choose the gate in the same series as the fence so slat size and spacing line up. If you are planning both, see aluminum privacy fence options for the side yards.
Pools and canyon lots
Gates in a pool barrier have their own safety requirements; ask us before you order. On canyon lots in the city’s Very High Fire Hazard Severity Zone, read our Zone 0 fence guide before planning anything close to the house.
How a Gate Project Works
- See the gates. Compare sliding and pedestrian gates in every series at the showroom, or call (818) 647-0007.
- Share your lot. Send your address, the opening widths and photos of the driveway, side yards and street side.
- Plan and quote. We match the series, color and gate type to your fence and quote per project.
- Installation. We install through our licensed installation partners, or supply your own contractor.
More ideas: driveway gate ideas and all our driveway gates in Los Angeles. Nearby: driveway gates in Encino.
Frequently Asked Questions
Do you install driveway gates in Studio City?
Yes, we do. We install through our licensed installation partners, and we supply the gates, fence and hardware from our showroom in Panorama City.
How tall can a gate be in Studio City?
Studio City follows City of Los Angeles rules, and gates count the same as fences. Most front yards are limited to about 3.5 feet, or 6 feet on lots zoned A or RA. Side and rear gates can reach 8 feet only on flat lots at least 40 feet wide; on hillside-area lots or lots narrower than 40 feet, the limit is 6 feet.
Is a sliding gate a good fit for a short driveway?
Usually, yes. A sliding gate moves along the fence line instead of swinging into the driveway, so it works where there is no room for a swing gate to open. It does need clear space beside the opening to slide into.
Which gate suits a narrow side yard?
A 4 x 6 ft pedestrian gate in the same series as the fence. Ventura louvers block the view straight on while letting air move through, which helps when the side yard is only a few feet from a neighbor.
What size are your sliding driveway gates?
Our sliding gate panels are 16 x 6 ft and come in all five series: Linea, Ridgeline, Hampton, Summit and Ventura.
Where can I see the gates in person?
At our showroom, 14600 Arminta St, Panorama City, Monday to Friday 8 am to 5 pm, or Sunday 10 am to 4 pm by appointment.
Planning a Gate in Studio City?
Visit the showroom or send your address, the opening widths and a few photos. We will help you choose the gate and plan it around your lot.