Encino, CA · Driveway gates

Aluminum Driveway Gates in Encino

Sliding driveway gates and matching pedestrian gates in modern horizontal aluminum, made to line up with your fence. Chosen in our Panorama City showroom and installed through our licensed installation partners.

Driveway Gates for Encino Homes

Encino runs from the flat streets north of Ventura Boulevard up into the hillside to the south, toward Mulholland. Many homes sit behind long or sloped driveways, and the gate is the first thing a guest sees.

Our gates come in the same five aluminum series as our fences: Linea, Ridgeline, Hampton, Summit and Ventura. Pick the gate in the same series as the fence and the two read as one design. Every gate is T6063 aluminum, powder coated in matte black, so it will not rust, rot or need repainting, and it carries a 25-year limited warranty.

Planning the fence as well? See our fence installation page for Encino.

A real Encino project

Ridgeline Gates on an Encino Hillside

The owners wanted the gates to look like part of the fence. The Ridgeline gate uses the same 4 inch horizontal slats, so the lines carry straight through.

Ridgeline black aluminum privacy fence and gate in Encino
Ridgeline fence and gate, 4 inch horizontal slats, Encino.
Ridgeline aluminum pedestrian gate in Encino
The pedestrian gate lines up with the fence on either side.
Ridgeline aluminum fence on an Encino hillside
The same fence follows the side yard toward the view.
Gate options

Gates That Suit Encino Driveways

Every gate comes in the series that matches your fence.

Sliding driveway gates

16 x 6 ft sliding gate panels in all five series. A sliding gate runs along the fence line instead of swinging out, which suits the short or sloped driveways common on Encino’s hillside streets.

Pedestrian and side yard gates

4 x 6 ft gates for front walks and side yards in every series, so the walkway matches the driveway. The Linea pedestrian gate also comes in white.

Wood-look gates

Our WPC composite fence has matching 3 x 6 ft pedestrian gates in teak and dark gray, the same material as the dark gray WPC fence we supplied for another Encino home.

Encino Gate Height Rules

Encino is part of the City of Los Angeles, and gates follow the same height limits as fences.

  • Front yard: about 3.5 feet in most residential (R) zones, or 6 feet on lots zoned A or RA. Taller front-yard gates need City Planning approval.
  • Side and rear yards: up to 8 feet on lots at least 40 feet wide and outside a hillside area. On hillside-area lots, which covers much of Encino south of Ventura Boulevard, the limit is 6 feet.
  • Near Mulholland Drive: homes close to Mulholland can fall inside the Mulholland Scenic Parkway Specific Plan, which limits the materials for fences, gates and walls visible from the parkway and can require design review.

Source: LADBS, Heights of Fences in Residential Zones. Rules change and individual lots can have special conditions, so confirm with the Department of Building and Safety before you order. We are happy to plan the gate around your lot.

Choosing a Driveway Gate in Encino

Driveway length and slope

Measure the opening and the space beside it. A sliding gate needs room to slide along the fence; on a sloped driveway it also avoids the arc a swing gate needs to clear the ground.

Match the fence

Ridgeline’s 4 inch slats give full privacy, Summit uses wider 6 inch slats, and Ventura louvers block the view straight on while letting air through. Choose the gate in the same series and the slat size and spacing line up. Our series comparison sets them side by side.

Pool areas

Gates in a pool barrier have their own safety requirements. Ask us before you order, and see our aluminum pool fence page.

Hillside and fire hazard areas

Parts of the Encino hills are in designated fire hazard areas. Aluminum does not burn the way wood does, and California is adding new rules for the space closest to homes. Our Zone 0 fence guide explains them; check current requirements with the city.

How a Driveway Gate Project Works

  1. See the gates. Compare sliding and pedestrian gates in all five series at the showroom, or call (818) 647-0007.
  2. Share your driveway. Send your address, the opening width, the slope and a few photos of the driveway and the street side.
  3. Plan and quote. We match the series, color and gate type to your fence and quote per project.
  4. Installation. We install through our licensed installation partners, or supply your own contractor.

More ideas: driveway gate ideas, choosing an aluminum gate for a modern home, and all our driveway gates in Los Angeles.

Questions

Frequently Asked Questions

Do you install driveway gates in Encino?

Yes, we do. We install through our licensed installation partners, and we supply the gates, fence and hardware from our showroom in Panorama City.

How tall can a driveway gate be in Encino?

Encino follows City of Los Angeles rules, and gates count the same as fences. In the required front yard, most residential lots are limited to about 3.5 feet, or 6 feet on lots zoned A or RA. Taller front-yard gates need City Planning approval, so check your lot before choosing a 6 ft gate.

What size are your sliding driveway gates?

Our sliding gate panels are 16 x 6 ft and come in all five aluminum series: Linea, Ridgeline, Hampton, Summit and Ventura. Pedestrian gates are 4 x 6 ft in the same series.

Can the gate match my fence?

Yes. Choose the gate in the same series as your fence and the slats line up from one to the other, as they do on our Ridgeline project in Encino. If your fence is not one of ours, bring photos to the showroom and we will suggest the series that sits best beside it.

Do the gates come in colors other than black?

Our aluminum gates come in matte black, and the Linea pedestrian gate is also available in white. For a wood look, our WPC composite pedestrian gates come in teak and dark gray.

Where can I see the gates in person?

At our showroom, 14600 Arminta St, Panorama City, Monday to Friday 8 am to 5 pm, or Sunday 10 am to 4 pm by appointment.

Planning a Driveway Gate in Encino?

Visit the showroom or send your address, the opening width and a few photos. We will help you choose the gate and plan it around your lot.

14600 Arminta St, Panorama City, CA 91402Mon–Fri 8 am – 5 pmSun 10 am – 4 pm by appointment