Aluminum Wall Toppers for Block, Stucco and Concrete Walls
Add height and privacy to the wall you already have. Lumina aluminum wall toppers mount on top of an existing wall, in matte black or white, with no demolition and no new footings.
What Is an Aluminum Wall Topper?
A wall topper is an aluminum extension that mounts on top of an existing wall. It turns a low block, brick, stucco or concrete wall into a taller, more private boundary without tearing the wall down.
Many homes in Los Angeles already have a perimeter wall, but it is often too low to give real privacy from a neighbor’s second floor or the street. Rebuilding that wall taller means demolition, new footings, masonry work and, depending on the height, engineering and permits. A wall topper keeps the wall you have and adds height on top of it, anchored with heavy-duty base screws.
It also changes how the wall looks. A plain block wall with a clean aluminum topper reads as a finished, modern boundary instead of a utility wall. The same finishes are used across our aluminum fence collection, so a topped wall can match a new fence or gate elsewhere on the property.
Why Homeowners Add a Wall Topper
More privacy
Raise a low wall so the yard is screened from the street, a sidewalk or a neighbor’s windows, without building a new wall.
No demolition
The topper anchors to the top of the existing wall. There is no tear-out, no new footings and far less disruption to the yard.
A modern finish
Matte black or white aluminum gives an old block or stucco wall a clean, contemporary line that matches modern homes.
Weather protection
An optional sloped capping with a drip edge sheds rain off the top of the wall, which helps protect masonry from water staining and seepage.
Low maintenance
Powder-coated aluminum does not rust or rot and does not need painting, staining or sealing.
Room for lighting
Accent grooves are available for outdoor LED strip lighting, so the top of the wall can glow softly at night.
Wall Topper Styles and Options
Wall toppers can be built in several looks, depending on how much privacy, light and airflow you want:
- Horizontal slats. The most popular choice for modern homes. Slats line up with a horizontal aluminum fence or gate elsewhere on the property, and the spacing sets how much the wall screens.
- Decorative laser-cut patterns. Patterned panels add texture and let filtered light through, a good fit for courtyards and garden walls. See our decorative metal panels.
- Frosted plexiglass inserts. For a softer screen that blocks views but keeps the space bright.
- Sloped V-shape capping. A capping profile with a built-in drip edge that channels rainwater away from the wall.
The Lumina wall topper comes in a 12 x 2 in x 8 ft section in matte black or white. Matte black is the most requested finish: it recedes against planting and sharpens the edge of the wall. White suits lighter homes and stucco.
Which Walls Can Take a Topper?
Lumina wall toppers anchor to concrete, block, brick, stucco, stone and wood walls using heavy-duty base screws. The wall underneath does the structural work, so it needs to be sound: no major cracks, no leaning sections and no loose blocks along the top.
Before you order, look at the top of the wall. A flat, even cap makes for the cleanest result. If the wall steps down a slope, the topper sections can follow the steps. Send us a few photos of the wall, including the top and both ends, and we will tell you how it can be finished.
Check the total height
Fence and wall height limits usually apply to the wall and the topper together, not to the topper alone. Rules depend on your city, your zone and where the wall sits on the lot. In the City of Los Angeles, for example, front-yard fences and walls are generally limited to about 3.5 feet, while side and rear limits are higher on many lots. Check with your city and your HOA before you add height. Our areas we serve pages explain fence rules in many Los Angeles neighborhoods.
Wall Topper or a New Wall?
A new, taller masonry wall is the right answer when the existing wall is failing or too weak to carry more height. In most other cases, a topper does the job for far less disruption. You keep the wall, the landscaping along it stays in place, and the work is done in a fraction of the time a rebuild takes.
If you are also replacing a fence on another side of the property, a topper lets the whole boundary share one look. A topped front wall, a horizontal aluminum privacy fence along the side and a matching driveway gate can all use the same matte black finish.
Ordering and installation
Cutting and fabrication are done in-house at our Panorama City warehouse, so topper sections can be cut to the length of your wall. Contractors and builders can order through our wholesale program.
Do you install? Yes, we do. We install through our licensed installation partners, so you can choose your topper at the showroom and have the whole project handled from one place. See our fence installation service in Los Angeles.
Wall Topper Questions
What is an aluminum wall topper?
An aluminum extension that mounts on top of an existing block, brick, stucco or concrete wall to add height, privacy and a modern finish without rebuilding the wall.
What size is the Lumina wall topper?
The Lumina wall topper comes in a 12 x 2 in x 8 ft section, in matte black or white.
What kind of walls can it go on?
Concrete, block, brick, stucco, stone and wood walls. It anchors to the top of the wall with heavy-duty base screws, so the wall needs to be in sound condition.
Do I need a permit to add a wall topper?
It depends on your city and the total height of the wall and topper together. Height limits are usually lower in front yards than at the side and rear. Check with your city and HOA before you add height.
Can a wall topper have lighting?
Yes. Accent grooves are available for outdoor LED strip lighting along the top of the wall.
Do you install wall toppers?
Yes, we do. We install through our licensed installation partners. Request a quote with photos of your wall and its length.
Can I see the wall topper in person?
Yes. Visit our showroom at 14600 Arminta St, Panorama City, Monday to Friday 8 am to 5 pm, or Sunday 10 am to 4 pm by appointment.
Add Height to the Wall You Already Have
Send us a few photos of your wall and its length, or visit the showroom to see the finishes in person.